Subnet Settings¶

Use private subnets for initial nodegroup¶

If you prefer to isolate the initial nodegroup from the public internet, you can use the --node-private-networking flag. When used in conjunction with the --ssh-access flag, the SSH port can only be accessed from inside the VPC.

Note

Using the --node-private-networking flag will result in outgoing traffic to go through the NAT gateway using its Elastic IP. On the other hand, if the nodes are in a public subnet, the outgoing traffic won't go through the NAT gateway and hence the outgoing traffic has the IP of each individual node.

Custom subnet topology¶

eksctl version 0.32.0 introduced further subnet topology customisation with the ability to:

List multiple subnets per AZ in VPC configuration
Specify subnets in nodegroup configuration

In earlier versions custom subnets had to be provided by availability zone, meaning just one subnet per AZ could be listed. From 0.32.0 the identifying keys can be arbitrary.

vpc:
  id: "vpc-11111"
  subnets:
    public:
      public-one:                           # arbitrary key
          id: "subnet-0153e560b3129a696"
      public-two:
          id: "subnet-0cc9c5aebe75083fd"
      us-west-2b:                           # or list by AZ
          id: "subnet-018fa0176ba320e45"
    private:
      private-one:
          id: "subnet-0153e560b3129a696"
      private-two:
          id: "subnet-0cc9c5aebe75083fd"

Important

If using the AZ as the identifying key, the az value can be omitted.

If using an arbitrary string as the identifying key, like above, either:

id must be set (az and cidr optional)
or az must be set (cidr optional)

If a user specifies a subnet by AZ without specifying CIDR and ID, a subnet in that AZ will be chosen from the VPC, arbitrarily if multiple such subnets exist.

Note

A complete subnet spec must be provided, i.e. both public and private configurations declared in the VPC spec.

Nodegroups can be restricted to named subnets via the configuration. When specifying subnets on nodegroup configuration, use the identifying key as given in the VPC spec not the subnet id. For example:

vpc:
  id: "vpc-11111"
  subnets:
    public:
      public-one:
          id: "subnet-0153e560b3129a696"
    ... # subnet spec continued

nodeGroups:
  - name: ng-1
    instanceType: m5.xlarge
    desiredCapacity: 2
    subnets:
      - public-one

Note

Only one of subnets or availabilityZones can be provided in nodegroup configuration.

When placing nodegroups inside a private subnet, privateNetworking must be set to true on the nodegroup:

vpc:
  id: "vpc-11111"
  subnets:
    public:
      private-one:
          id: "subnet-0153e560b3129a696"
    ... # subnet spec continued

nodeGroups:
  - name: ng-1
    instanceType: m5.xlarge
    desiredCapacity: 2
    privateNetworking: true
    subnets:
      - private-one

See here for a full configuration example.